Hit enter to search or ESC to close

INSPIRATIONVisit
NEWSVisit
SHED DESIGNERVisit
LOCATIONSVisit
ABOUT USVisit
RESOURCESVisit
FRANCHISINGVisit

GET A QUOTE

OUR PRODUCTS

Garage with
Lean To

Get a Quote

Different homes have different needs, and one of the most versatile solutions for protecting vehicles while maximising storage space is a garage with a lean to attached.

At Fair Dinkum Builds, we have years of experience in designing and building garages with lean tos, and using high quality materials and expert craftsmanship, we'll create the perfect space that is both functional and stylish.


Customisable Garage with Lean To

From the start of your journey with us, our expert team will help you create the best garage with lean to that meets your specific requirements. So, whether you want to concentrate on your sheltered space or focus more on security, we'll make sure the finished product meets your demands perfectly.

From your profile options to the doors, every element of your garage with lean to can be customised for you. Take a look at our Shed Designer App to see what's possible!

Stramit® Corrugated roof and wall cladding
  • A cost-effective and reliable roof (or wall) cladding for garages
  • Traditional roofing methods, enhanced by contemporary design and engineering
  • Lightweight, durable and quick to set up.
Stramit Monoclad® roof and wall cladding
  • A balanced design of water-carrying capacity, wind-load performance, and simple fixing.
  • Compatible Stramit Monolap lap joint system allows for single-plane, long-run roofs.
  • Suitable for two-degree roof pitch minimum.
Stramit K-Panel® wall sheeting
  • K-Panel® cladding is wide-covering, and perfect for smaller garages
  • Its lower profile allows for smaller flashing, helpful for tighter budgets
  • Its conventional fastening system makes it quick and simple to install
Stramit Monopanel® wall cladding
  • Monopanel® cladding gives your garage’s exterior clean, fresh lines
  • Available in a wide selection of COLORBOND® steel colour options
  • Not available in Queensland, Northern Territory, or Western Australia.
Stramit® C-Clad 280 wall sheeting
  • Traditional lines and concealed fasteners
  • Easy installation and cleaning
  • Low profile lets you use smaller flashing 
  • Can be installed both horizontally and vertically
Stramit SharpLine® architectural wall cladding
  • Add elegance and class to your garage through the striking look of SharpLine® cladding
  • Let your architectural creativity shine through 
  • Attaches with direct-fix fasteners.

The large range of COLORBOND® steel range of designer colours offers a classic and contemporary palette to enhance the beauty of every build.

COLORBOND® steel
Southerly®

COLORBOND® steel
Bluegum®

COLORBOND® steel
Night Sky®

COLORBOND® steel
Surfmist®

COLORBOND® steel
Shale Grey™

COLORBOND® steel
Evening Haze®

COLORBOND® steel
Dune®

COLORBOND® steel
Woodland Grey®

COLORBOND® steel
Monument®

COLORBOND® steel
Gully™

COLORBOND® steel
Jasper®

COLORBOND® steel
Wallaby®

COLORBOND® steel
Ironstone®

COLORBOND® steel
Deep Ocean®

COLORBOND® steel
Windspray®

COLORBOND® steel
Basalt®

COLORBOND® steel
Pale Eucalypt®

COLORBOND® steel
Cottage Green®

COLORBOND® steel
Manor Red®

COLORBOND® steel
Paperbark®

COLORBOND® steel
Classic Cream™

COLORBOND® steel
Dover White™



Colour lead times may vary on certain finishes in some areas. Check with your Fair Dinkum Builds representative before ordering.

The COLORBOND® steel colour swatches displayed have been reproduced to represent actual product colours as accurately as possible. However, we recommend checking your chosen colour against an actual sample of the product before purchasing, as varying light conditions, screens and devices may affect colour tones and finishes.

COLORBOND® steel and ® colour names are registered trademarks of BlueScope Steel Limited. ABN 16 000 011 058.

More weather protection for steel industrial buildings in coastal and industrial environments.

COLORBOND® Ultra steel
Shale Grey™

COLORBOND® Ultra steel
Monument®

COLORBOND® Ultra steel
Woodland Grey®

COLORBOND® Ultra steel
Surfmist®

COLORBOND® Ultra steel
Dune®

COLORBOND® Ultra steel
Wallaby®

COLORBOND® Ultra steel
Windspray®



Colour lead times may vary on certain finishes in some areas. Check with your Fair Dinkum Builds representative before ordering.

The COLORBOND® Ultra steel colour swatches displayed have been reproduced to represent actual product colours as accurately as possible. However, we recommend checking your chosen colour against an actual sample of the product before purchasing, as varying light conditions, screens and devices may affect colour tones and finishes.

COLORBOND® Ultra steel and ® colour names are registered trademarks of BlueScope Steel Limited. ABN 16 000 011 058.

Create a softer, more subtle look with a true Matt finish.

COLORBOND® steel Matt
Bluegum®

COLORBOND® steel Matt
Monument®

COLORBOND® steel Matt
Basalt®

COLORBOND® steel Matt
Surfmist®



Colour lead times may vary on certain finishes in some areas. Check with your Fair Dinkum Builds representative before ordering.

The COLORBOND® steel Matt colour swatches displayed have been reproduced to represent actual product colours as accurately as possible. However, we recommend checking your chosen colour against an actual sample of the product before purchasing, as varying light conditions, screens and devices may affect colour tones and finishes.

COLORBOND® steel Matt and ® colour names are registered trademarks of BlueScope Steel Limited. ABN 16 000 011 058.

Achieve the design edge you’re looking for with the UniCote® LUX world-first, innovative multi-paint method and stand out from the crowd.
UniCote® LUX finishes are only available in Stramit SharpLine® and Monopanel® cladding.

UniCote LUX Stramit Silver Quartz Swatch

UniCote® LUX
Silver Quartz

UniCote Lux Stramit Weathered Iron Swatch

UniCote® LUX
Zinc Graphite

UniCote Lux Stramit Pentagon Swatch

UniCote® LUX
Pentagon

UniCote Lux Stramit Spectrum Swatch

UniCote® LUX
Spectrum

UniCote Lux Stramit Weathered Iron Swatch

UniCote® LUX
Weathered Iron

Swatch of close up UniCote LUX Ashwood woodgrain texture

UniCote® LUX
Ashwood



Colour lead times may vary on certain finishes in some areas. Check with your Fair Dinkum Builds representative before ordering.

The UniCote® LUX images displayed have been reproduced to represent actual product colours as accurately as possible. However, we recommend checking your chosen colour against an actual sample of the product before purchasing, as varying light conditions, screens and devices may affect colour tones and finishes.

UniCote® is a registered trademark of Colossal Management Pty Ltd.

Apply MagnaFlow® sheeting to your steel building projects for more durability and extra protection in corrosive environments.

MagnaFlow®
Off White

MagnaFlow®
Birch

MagnaFlow®
Armour Grey

MagnaFlow®
Slate Grey

MagnaFlow®
Monolith



Colour lead times may vary on certain finishes in some areas. Check with your Fair Dinkum Builds representative before ordering.

The MagnaFlow® colour swatches displayed have been reproduced to represent actual product colours as accurately as possible. However, we recommend checking your chosen colour against an actual sample of the product before purchasing, as varying light conditions, screens and devices may affect colour tones and finishes.

MagnaFlow® is a registered trademark of Fletcher Building Holdings Limited.

SuperDura™ Stainless steel is design to provide performance in severe coastal and industrial environments.

SuperDura™ Stainless steel
Windspray®

SuperDura™ Stainless steel
Dune®

SuperDura™ Stainless steel
Deep Ocean®



Colour lead times may vary on certain finishes in some areas. Check with your Fair Dinkum Builds representative before ordering.

The SuperDura™ Stainless steel colour swatches displayed have been reproduced to represent actual product colours as accurately as possible. However, we recommend checking your chosen colour against an actual sample of the product before purchasing, as varying light conditions, screens and devices may affect colour tones and finishes.

SupaDura™ Stainless steel and ® colour names are trademarks of BlueScope Steel Limited. ABN 16 000 011 058.

We recognise that different customers have different needs for their garages. This is why we tailor every shed or garage we produce for your site, so it fits your unique requirements and dimensions.

Taurean NovaTaur®
  • NovaTaur® rollers are ideal for residential garages with a rounded panel and stylish appeal
  • Its spring-system is tested to work to 25,000 cycles
  • Its quiet and discrete operating system is perfectly suited to a residential area.
Taurean Pr1me roller door
  • A general all-round performer in regards to security, strength and aesthetics
  • The Pr1me shed roller doors have a stylised and refined, rounded appearance
  • An excellent option for residential garages with multiple safety features and a balanced spring system tested to 25,000 cycles.
Taurean Windstrong®
  • Windstrong® roller doors are engineered for optimal wind resistance
  • The Windstrong® roller door’s wide-access makes it ideal for a residential setting
  • These roller doors feature a built-in flexible sealing strip for dirt and debris protection.
11 degrees
  • 11º is often considered the optimum roof pitch for residential garages
  • It is a classic and timeless gradient that is pleasing on the eye
  • Can be suited to either monopitched or gable-roofed garages.
Garage render with 11 degree gable roof Garage render with Skillion 11 degree roof pitch
15 degrees
  • 15º provides a more expansive internal clearance area for your garage
  • It casts a strong and defined roofline
  • Its roof slope performs well in harsh weather conditions.
  • Suitable for both gable and skillion roof styles.
Garage render with 15 degree gable roof Garage render with 15 degree skillion roof
22 degrees
  • The ideal pitch for customers who wish to fix solar panels onto their garage roof
  • Provides a substantial clearance area to house large cars easily
  • 22º is a suitable roof gradient for both monopitched and gable-roofed garages.
Garage render with 22 degree gable roof Garage render with 22 degree skillion roof
30 degrees
  • Alternative roof-slope for garage owners who enjoy a robust architectural profile
  • Generous internal clearance area that can hold a mezzanine or large vehicles
  • Can only be used on gable-roofed garages.
Garage render with 30 degree gable roof
45 degrees
  • A defined and impactful roof-profile that resembles a church
  • Provides excellent performance in heavy rain or snowfall
  • Heritage-listed building owners often choose a 45º roof pitch
  • Only suitable for use on gable roof garages.
Garage render with 45 degree gable roof
Step Skillion
  • A distinctly current and modernised garage aesthetic favoured by many
  • Add some additional shelter to your garage that you can use for storage or shade
  • Step Skillions often provide an ideal solution for garages that are near height restrictions
  • Can combine roof pitch options suitable for skillion roofs (between 5º and 22º).
Garage render with step skillion roof pitch
Eave overhangs
  • Eave overhangs protect the openings of your garage from rainfall
  • A favoured option by those who want an ultramodern looking garage
  • Is effective in both rainy and snowy climates.
Eave shed
Lean-to side walls
  • Get the most out of the available space by adding additional coverage to the side of your garage
  • Provides the perfect area for a BBQ, additional storage or a workstation
  • Choose to enclose it with wall cladding or leave it open
  • Lean-tos are available on roof pitches ranging between 5º and 2º and can be added to both skillion or gable roofs.
Garage  render with lean-to with no drop
InfinitiLine® gutter
  • InfinitiLine gutters provide excellent water-carrying and high performance overflow protection in heavy rain events
  • The InfinitiLine® gutter’s overflow protection slots are concealed, to maintain a smooth continuous line
  • Reduce the risk of water damage to your garage or its contents
  • Available in NSW and ACT only.
Open or closed-in gables
  • The high-pitch of gable roofs provides excellent water dispersion
  • Can be used in combination with eaves and other design options to make your garage stand out
  • Opt for an open or closed gable design – depending on your needs and tastes.
Skylight
  • Let natural sunlight into your garage space with our fibreglass or polycarbonate skylight sheeting
  • Save on heating or lighting costs during the day
  • Our polycarbonate skylights are extra strong and made to endure many years of use.
Other gutters
  • Choose from our wide range of gutters to create a rainwater solution that suits your garage and property
  • Various styles and sizes available to ensure compliance with regional requirements
  • The gutters we offer come in a wide variety of COLORBOND® steel colour options.

Our industry-leading system warranty offers you peace of mind and security. All Fair Dinkum Builds designs are engineered using our unique software solutions and backed by our technical expertise, meaning we'll guarantee they'll withstand wind conditions for 30 years.

That's over and above any materials warranty you get from our suppliers.

Our system warranty is subject to the limitations and qualifications set out in the Warranty Terms and Conditions available here.

All our garages and other quality products are engineered to the highest safety standards and therefore comply with all national, state and territory building code requirements.

Our sheds are also ShedSafe accredited – an industry recognised stamp of approval, so you know that your shed will protect you, your family and your investment.

 

What is the Benefit of Building a Garage With a Lean To?

The biggest benefit of building a garage with a lean to is that you're offered a huge amount of functionality and versatility. Whether you need additional covered storage space or semi-sheltered parking, a lean to garage offers a lot!


Why Build Your Garage with Lean to With Fair Dinkum Builds?

With Fair Dinkum Builds, you can trust that your garage with lean to will be structurally sound, functional, and built to last. We also understand the importance of creating a space that meets your specific needs, which is why we work closely with you at every step to tailor the design to your preference.

We also bring years of expertise and dedication to quality to the table, meaning that you can rest assured knowing that you're in the best possible hands when building a garage with lean to for your property.


FAQs About Building Garages with Lean Tos

Do I need planning permission to build a garage with lean to in Australia?

Yes, you will need planning permission to build a garage with a lean to in Australia. Different states and territories have different planning requirements as well, but this is something we'll be able to help with when we start working on your project.

How much does it cost to build a garage with lean to?

The amount it costs to build a garage with lean to will depend on the size of your project, the materials chosen, and more. To get a better idea of overall prices, contact us today for a quote.

Where can Fair Dinkum Builds build garages with lean tos?

Fair Dinkum Builds has multiple outlets across Australia, and you can find your nearest here.